This Intercooler Reasonator delete hose fits the 2007 onwards BMW Mini Cooper S. This hose replaces the two OEM hoses and a sound resonator. The purpose of the OEM resonator is to reduce the roar / whoosh noise that can often be associated with air passing through pipe work. By removing this resonator with a smooth bore hose the resistance is reduced. Several of our competitors claim horsepower gains for the installation of this type of hose, but our own testing showed these to be marginal so we prefer not to make such claims. We did however see change in the torque characteristics with between 10 and 15 ft/lbs improvement on our own test car. It is always difficult to quantify gains for a specific product as a lot will depend on other modifications that have been carried out.
ypically if the car is running tuned software with a free lowing downpipe and exhaust, changes made on the intake, with the fitment of this hose and or a intake filter kit will be more dramatic. From a drivers perspective, after fitting this hose on its own, we did not perceive any increase in noise, but there was a noticeable change in the willingness for the engine to accelerate, which can be associated with the torque improvement and small gain in horsepower.
As an added bonus this hose is available in red, blue, or black (a real stealth install) and will withstand greater temperatures and pressures than the original hose.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
I read a lot about this tube before I purchased it. Now that I have it in my hands to meets and exceeds the forge quality that Have come to expect.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.