If you wish to rebuild or service your Forge Motorsport product, we can offer a kit of replacement parts. By servicing your Valve/Adaptor at regular intervals, you can ensure that your Forge Motorsport product will last a lifetime.
Each service kit varies depending on which product you need it for.
Valve service kits ONLY contain replacement "O" rings, piston, and grease.
Blow Off Adaptor service kits contain ONLY replacement "O" rings and bolts.
The Splitter Valve service kit contains a replacement brass piston and spring.
Other that have O-rings situated on the piston will not come with a piston as the wear is on the O-rings rather than the piston itself.
Kits with additional cost added include two service kits.
If you would like to know what is included in your specific valve service kit, please contact us. If you do not see your product listed, please contact us with your requirements.
For on how to service your valve, click on the 'fitting guide' tab above.
If you are unsure which option is suitable for you, please contact us.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Forge Motorsport Valve Service Kit
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport