Forge has developed this turbo outlet muffler delete pipe for the 1.8 and 2.0 petrol turbo (TSI) (EA888 engine).
It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part.
On a 2.0L Porsche Macan, this muffler delete gave an additional 10bhp during dyno tests.
This is a direct replacement for Part Number 06H 131 111.
This product fits:
Golf Mk7 GTI
Polo 1.8TSI (2015-)
Audi S1 2.0TSI
Audi S3 (8V)
Audi A4 B8 2.0TFSI
Seat Leon Cupra 280
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
the product was pretty high quality, by my low experience standards. It definately changed the sound of my turbo. Before it was loud and a bit messy but with this it sounds much cleaner, however it is a bit quieter. This is so far my second mod after a cold air intake (im going for sound atm). overall im pleased with the change.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.