Fitting this part increases the airflow into the turbo by replacing the restrictive plastic OEM turbo inlet pipe.
This innovative product fits all MQB platforms as well as both left and right hand drive vehicles.
When fitting this part, you will increase the available airflow and create an impressive sound by creating a larger, smoother transition between the turbo inlet hose and compressor housing inlet.
An all-aluminium construction that fits with standard inlet hose or aftermarket systems, featuring a precision mandrel bent CNC formed pipe along with a precision CNC high flow machined flange.
Twin o-ring seal design between the turbo coupler and inner surface of the turbo inlet ensures no leaks and no debris can be drawn into the turbo internals. This part also fits with our induction hose, FMMK7INDH
- Increased airflow.
- All aluminium construction.
- CNC machined couplers for a precision fit.
- No check engine lights
- Black hardwearing powdercoated finish.
- Compatible with LHD and RHD
- Up to 8 BHP and 16 ft/lbs or torque improvement
- Made in Great Britain.
This parts fits:
Audi - 8V S3 - Quattro 2.0T
Audi - A3 8V - FWD/Quattro - 1.8T/2.0T
Audi - MK3 TT (2014+) - Quattro - 2.0T
Audi - MK3 TTS (2014+) - 2.0T
VW - Alltrack - 1.8T Gen3
VW Golf MK6 - GTI/Hatchback/Sportwagen - 1.8T Gen3
VW Golf MK6 - GTI - 2.0T Gen3
VW Golf MK6 Facelift - FWD - 1.8T/2.0T Gen3
VW Golf MK6 R - GTI/4Motion - 2.0T Gen3
VW Golf MK6 - SportWagen Facelift FWD/4Motion - 1.8T Gen3
VW Jetta MK6 - GLI - 2.0T Gen3
VW Tiguan MQB - FWD/4Motion - 2.0T Gen3
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
I got the MQB turbo inlet 2018 Volkswagen Tiguan and after the easy one bolt installation and about 20 minutes I started the end and noticed immediate response and increase in fuel economy very please with purchase. Looking forward to more goodies
Installed this high flow turbo inlet on my MK7 gti. Great little add on for more air flow to your turbo! Installation is pretty simple, just keep an eye on the double O-ring to make sure you don’t crush it. Recommend it to everyone!
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.