A silicon intake hose for the
Mitsubishi Colt CZT, which runs from the airbox to the turbo. Please note that with modifications these can also be fitted to the SMART Brabus ForFour Petrol engine only. Modifications required on a SMART Brabus ForFour. Please see guide provided by www.forfour.co.uk
This can be used in conjuction with our silicon turbo pipes, FMKTCZTA and FMKTCZTB, however it will not be required if you are using the Forge Motorsport hard pipe kit FMHPKCZT.
It is available in a choice of colours, selectable from the options above. Please be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Silicone Intake Hose for the Mitsubishi Colt CZT and Smart Brabus ForFour
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport