Brand: Forge Motorsport

Blow Off Valve for Volkswagen, Audi, Skoda, Cupra 2.0 2021 Onwards

Product code: FMDV32A
$349.83

Please select product options and quantities below:

Stock remaining: 2

Product Options:

More info If you wish to rebuild or service your Forge valve we can offer a kit of parts. These kits vary with your chosen valve but typically contain a replacement piston with suitable "O"rings or diaphragm as may be required. - Read More
More info This kit contains a range of springs suitable for tuning either the FMDVFSIT, FMDVFSITVR, FMDVVXR valves. - Read More

How to Service Your Valve

Description

Product Description

This is a replacement for OEM Part Number 06N.145.710.B

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner

Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2021-on VAG 2.0 TSI engine (engine codes DNP & DNFB). This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition!

Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer life but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning-fast response. It has also been proven in cars running over 600bhp!

This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the air filter, older larger valves and sandwich plates will not fit this engine.

In The Box:
1 x FMDV32 Valve
1 x Wiring Harness
1 x Solenoid, Bracket, and Screws
1 x Blue Spring (Uprated)
1 x 5mm Brass T Piece
12 x Cable Ties
1 x 1500mm Length of 4mm Vac Hose
1 x Forge Keyring and Sticker

 

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Product Reviews

Product Reviews

Be the first to review this product

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Tags

Audi
Cupra
Skoda
  • Octavia
    • Mk4 NX 2020-
Volkswagen

Instructions

Blow Off Valve for Volkswagen, Audi, Skoda, Cupra 2.0 2021 Onwards

Warranty

Warranty Information

The majority of Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you — failure to supply this proof will result in your claim or enquiry being denied. Please note that some products are excluded from the Forge lifetime warranty and instead carry their own specific warranty terms — for example, air filters, electrical components, coil packs, carbon fibre products, and suspension kits. This page is a summary only; a full and current list of exclusions, along with their specific warranty terms, can be found on our Terms & Conditions page.

For further information, please call our customer service team on +1 865 951 7456 or email sales@forgemotorsport.com

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos, to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean your cooler, and thoroughly rinsed away afterwards. We recommend that you inspect your product regularly for bent and/or crushed fins — any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used. Be sure you never mix coolant types, and always use distilled water.

This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier's instructions, or any alteration or repair carried out without the supplier's approval.

This does not affect your statutory rights.

Ignition Coil Packs

Forge ignition coil packs carry a 12 month warranty against manufacturing defects (not our Lifetime Warranty), from date of purchase. As coil packs are often swapped as a full set on suspicion rather than a confirmed fault, claims must identify the specific faulty unit(s) with supporting evidence (e.g. a diagnostic misfire code) and proof of purchase. Full sets cannot be claimed without this. See full terms and conditions for details.

Electrical Components

Electrical components supplied with Forge Motorsport kits — including solenoids, wiring harnesses and looms — are covered by a 12 month warranty against manufacturing defects, rather than our standard Lifetime Warranty. This covers faulty materials or workmanship only, and does not cover damage from incorrect installation, water ingress, wear, incorrect wiring, or faults originating from your vehicle's own electrical system or other aftermarket electrical accessories. Full terms, including how to make a claim, are available in our Terms & Conditions.

Heat Management Products (Turbo Blankets and Gold Reflective Heat Barrier)

Turbo blankets and our gold reflective heat barrier are covered by a 6 month warranty against manufacturing defects (not our Lifetime Warranty), from date of purchase. Turbo blankets cure and lose flexibility over their first few heat cycles as a normal part of fitting. Once heat-cycled they should not be removed. The gold reflective heat barrier is designed for components such as engine covers, intake pipes and induction trays, not for direct contact with exhausts or turbine housings. See Terms & Conditions for details.

Shipping

Shipping

USA Deliveries

All Deliveries are sent via Fedex. We cannot guarantee delivery timelines as all orders are up to shipper schedules and routes.  Delivery fee is a Flat Rate of $20 fo all orders over $20. Orders below that value are costed out based on weight. Signature required may be added to your package. Orders can not be re-directed, held, or re-scheduled.

Shipping outside of the Lower 48- Duty Charge Information

All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. 


Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.com email address if you require any more information. We reserve the right to change the delivery service and company at any time.

***Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.