One pair of Forge Motorsport strut top covers, CNC machined from aluminium billet.
These will not only improve the appearance of the strut tops but will also eliminate any water ingress from the top which is a common problem on the many vehicles, this issue can cause corrosion which can further develop to strut failure and other problems along the strut tops.
Development prototypes were first created through 3D CAD and then prototyped on our inhouse 3D-Printer to allow for the best fit to stop corrosion of the strut top and provide a tight fit to prevent any water ingress occuring.
Available in 3 colours to suit whatever your vehicle or build may be, our strut top covers are aesthetically pleasing whilst also providing the key role of protecting the exposed strut tops as they come as standard.
No fasteners required as the machined internal thread allows these covers to screw directly on to the strut top stud.
Available in anodised black, red, or in a polished finish. Please choose from the dropdown above.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.