6 Speed Adjustable Quick Shifter for Audi, VW, SEAT, and Skoda
This quickshifter, once installed, will allow you to shorten the movement of your gear shift in order to obtain the optimum shifting times required for performance driving. You can personally customise the throw to suit your own preference, due to an infinitely adjustable pivot mechanism. This wide range of adjustment should allow for adjustment from stock to a 40% decrease in shifter throw. Click on the 'fitting guide' tab above, for detailed instructions.
This unit will fit all VAG 6 speed gear boxes as found in the 'compatible vehicles' tab above. This product is supplied with two sizes of pin, and one ball fitment, to ensure that it will match the various possible cables found on these vehicles.
To ensure that this product functions correctly and does not stress associated components, it is essential that the linkage cables are re-adjusted after the installation of this product, as per the fitting instructions.
Please note: This does not fit the Skoda Fabia/VW Polo/SEAT Ibiza/1.9 diesel applications.
In The Box:
1 x FMVWQS Shifter
1 x 8.4mm Pin
1 x 10mm Pin
1 x Ball Pin
1 x 8mm Nut
1 x Bent Nail
1 x Bag of Grease
1 x Instructions
1 x Forge Sticker
If you are unsure if this product is suitable for your application, please contact us.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.