Forge Motorsport present the Supercharger Reduction Pulley for the Audi S5 3.0T and replacement drive belt.
- Manufactured in house from stainless steel billet to exact tolerances
- 9% reduction from OEM pulley
- Tested and developed in conjunction with our Forge Asia office on their in-house dyno
- Unlike other manufacturers the Forge Pulley comes with our unparalleled LIFETIME WARRANTY.
- Supplied with genuine Audi replacement drive belt
We recommend the use of any leading remapping companies that have engine management calibration software when installing this product.
*Will not fit CRED and CREC engine, please see picture below for assistance.
In The Box:
1 x Forge Pulley
1 x Belt
1 x Forge Keyring
1 x Forge Sticker
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Audi S4 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit
Manufacturer: Forge Motorsport