We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
Forge Motorsport recirculation valve for the Fiat 500 Abarth T-Jet made from billet aluminium.
This recirculation valve replaces the standard electronic valve. This offers improved throttle response and clamping load to maintain boost pressure more reliably and eliminates the chance of common diaphragm failure.
The kit is complete with all fittings and includes a replacement solenoid and wiring harness to activate the valve to retain the engine management functionality. The valve itself is of piston design for longevity with the ability to be serviced and tuned with replacement springs if required. (See below)
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.
Please note: This product will NOT fit the 2012-on Abarth Multiair engine.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Recirculation Valve and Kit for Fiat 500 Abarth T-Jet
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Blow Off Valve for Ford Focus RS MK3 & Vauxhall Adam, Astra, Corsa, and more
Manufacturer: Forge Motorsport