While developing and testing our range of chargecooler radiators of Mercedes Flag ship A45 AMG (Pre-Facelift), we took the time to develop a DSG oil cooler kit to reduce the high DSG gearbox oil temperature experienced under prolonged and high loads testing. The large 13-row oil cooler is installed in the nearside lower bumper vent aperture that is unused on UK vehicles. This position allows optimum airflow to reduce oil temperatures.
This kit is supplied with all the brackets and hardware required to install the 13-row oil cooler and CNC machined billet aluminium adapter plate.
- Quality powder coated oil cooler housing bracket
- CNC machined and anodised adapter plate
- CNC machined and anodised banjo fittings
- Pre-assembled high-quality double braided AN-6 oil lines.
We recommend only using the correct Mercedes DSG oil to top up the gearbox (not supplied).
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product ReviewsBe the first to review this product
Want to leave a review?
Login Register FREE!
Mercedes A/CLA45 AMG DSG Oil Cooler Kit (2012-2015)
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Please fill out your details below
Blow Off Valve for Ford Focus RS MK3 & Vauxhall Adam, Astra, Corsa, and more
Manufacturer: Forge Motorsport