We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
With great looks and performance to back them up, the Mazdaspeed Protegé is a sport compact enthusiasts dream come true. Forge Motorsport have manufactured a valve that helps keep that dream in reality. The MSP01 is a unique twin piston blow-off valve that replaces the OEM piece. The 2 stage design allows the car to operate normally without worry of stalling, poor idle or check engine lights. Under boost the valve has a clean crisp sound that will definitely get you noticed. Aside from the head turning "Swoooooosh" the MSP01 looks as good as it sounds.
Machined from Billet aluminum the MSP01 is completely tunable and serviceable to keep up with your modifications as they progress. Installation is simple and takes less than 10 minutes. The MSP01 comes with Forge’s "No Hassle" limited warrantee and is available with your choice of two great finishes.
All Forge Motorsport Dual-Piston Atmospheric Valves have been designed and built with the intent of venting 100% of the residual charge air remaining in your forced induction system to the atmosphere at throttle lift. While we have incorporated many elements into the design of the Dual-Piston valves to aid in their compatibility with mass air-flow sensor equipped vehicles, we cannot always guarantee that each individual’s application will be compatible with a valve that vents the charge air into the atmosphere.
Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this valve onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of compensating for the loss of metered air through a vent-to-atmosphere valve such as this.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Blow Off Valve for Ford Focus RS MK3 & Vauxhall Adam, Astra, Corsa, and more
Manufacturer: Forge Motorsport