K03/K04 Forge Turbo Blanket - This blanket fits a multitude of applications - Please check the listing below
The Forge turbo blanket is designed to isolate the radiant heat produced by your turbocharger. These turbo blankets have been extensively tested in the harshest environments, road race and track.
The Forge development team have designed this product to withstand the harshest of environments and to assist in the protection and prolonging of your engine components. Its unique design will assist in reducing turbo lag and produce cooler air intake temperatures,
The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.
Fitting the Forge turbo blanket will also prevent the associated engine components from getting heat soaked by the turbocharger.
- Aerospace quality Stainless Steel Rivets
- Stainless Steel Fasteners
- Carbon fabric Outer Shell
- Calcium Magnesium Silicate Wool constructed Inner Core
- High temperature silica fabric
- Max Temperature Rating: 2150°F
- Continuous Use Limit: 1850°F
- Direct Contact Limit: 850°F
- Radiant Heat Limit: 1250°F
This Product Fits:
Audi 2008-2012 A3
Audi 2008-2009 TT
Audi 2009-2012 TT Quattro
Volkswagen 2009-2012 CC
Volkswagen 2009-2012 EOS
Volkswagen 2008-2012 GTI
Volkswagen 2008-2012 Jetta
Volkswagen 2006-2010 Passat
Volkswagen 2009-2012 Tiguan
Volkswagen 2012-2014 Golf R
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.