This front mounting intercooler kit has been designed as an upgrade for the Audi 2.0 TFSi (B8 models) and A5 2.0 TFSi. After extensive testing, we found that the most efficient core design for these models, was of a tube and fin construction, and along with an increase in surface area, plus an overall dimensional increase, we have been able to improve the cooling ability and reduce the pressure loss across our intercooler, when compared to stock intercooler.
With testing conducted both on road and on the dyno, to ensure that this kit really worked, our results showed both a reduction in inlet temperature, an increase in horsepower and torque, but with no detrimental effect on lag or spool up time. The Dyno results gave a respectable +12hp and + 28 ft/lbs on a standard tuned engine, with increased benefits when software tuned.
The hoses used are available in red, blue, or black. Please select your colour choice in the options above when ordering.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport