Visit our UK Site
Visit our Asia Site
Description
Product Description
Boost Tap for Ford Focust ST 180 (Mk7). This adaptor plate installs between the boost (MAP) sensor and mounting surface. This allows a tap to run a vacuum operated valve or for connection to a boost gauge.
When running this tap you are also able to retain your original engine cover.
In the box:
1 x Vacuum tap
1 x M6x20 Allen Cap Bolt
10 x Cable Ties
1 x 2000mm of 4mm Vacuum Tube
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
The boost tap is awesome! It fit nice and snugly and only took about 5 minutes to install including popping the hood and removing the engine cover. The supplied hose is excellent quality and more than enough to reach from the MAP sensor in the engine compartment through a grommet into the passenger compartment to the vacuum/boost gauge that I installed in the driver side register. Thanks.
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Ford Fiesta ST180 Boost Tap
Warranty
Warranty Infomation
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Please fill out your details below
We use Mailchimp as our marketing automation platform. By clicking submit to this form, you acknowledge that the information you provide will be transferred to MailChimp for processing in accordance with their Privacy Policy and Terms.
