A direct bolt on replacement Blow Off valve for the 2008 Subaru Impreza WRX, with either the 2.0 litre or 2.5 litre engines, and the Mazda 3
Please note: This valve will not fit the 2008 STi.
Please also note: The original diamond shaped mounting bracket O-ring is to be retained and fitted to the Forge valve.
In The Box:
1 x FMWRX301 Valve
1 x Uprated Yellow Spring
1 x Uprated Red Spring
1 x 40mm Hose Clamp
1 x 28mm Blanking Plug
1 x Forge Sticker
If you are unsure if this product is suitable for your application, please contact us.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.