We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
This Blow Off or Dump valve has been specifically designed for the Renault Megane RS250 RS265 and RS275. This kit includes a blanking plate, as the original or OEM valve should be removed to prevent issues with loss of boost pressure. This kit is available with either a red, blue, or black silicone hose, and contains everything needed for installation.
Please select the colour required in the options above.
In The Box:
1 x FMDVRMA Valve
1 x 500mm of 4mm Vacuum Tube
1 x 38mm Aluminium Hose Joiner
1 x Uprated Blue Spring
1 x MIE Blanking Plate
1 x 45mm Hose Clamp
1 x Silicone Reducing Elbow #588
1 x M6 Penny Washer
1 x M6 Plain Washer
1 x M6 x 16 Hex Head Bolt
1 x M6 Nyloc Nut
1 x 5mm T Piece
1 x Instructions
1 x Forge Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Blow Off Valve for Ford Focus RS MK3 & Vauxhall Adam, Astra, Corsa, and more
Manufacturer: Forge Motorsport