Forge are pleased to offer a Blow Off Valve (BOV) Adaptor for the Mercedes A180, A250, CLA 250 & GLA 250.
The spacers were developed to produce the great atmospheric BOV sound that is expected from your turbocharged vehicle, although normally lacking on your vehicle. This CNC machined spacer, made from solid billet aluminium, gives you that sound you have been looking for. When letting off the throttle you get that sweet and satisfying “whoosh” letting everyone know your Mercedes is in fact turbocharged.
It has been designed to work with the original electrically controlled solenoid and utilises high quality o-rings for a perfect seal. Mercedes equipped your car from the factory with a recirculating style turbocharger valve which allows the charge air to be routed around the turbocharger from the boost side back to the intake side. The downside to this style of system is it recirculates the hot air back into the intake side of the turbo, increasing temperatures. When equipping a vehicle with a Blow Off Adaptor like ours, it helps remedy this issue. This great solution for open air venting includes everything you will need for the install.
In The Box:
1 x FMSPMERC Blow Off Adaptor
3 x M6 x 35 Socket Cap Bolts
1 x Forge Sticker
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.