Yet another first for the Volkswagen and Audi Tuning Market from Forge Motorsport!
With the introduction of the VAG TSi Turbo Engine, we have developed a Patented Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with the Bosch engine management systems employed.
This is not only a high quality replacement for vehicles fitted with the OEM solenoid valve part number 06F 145 710 D, but will fit earlier applications of the 2.0 FSiT, the later TFSi 2 litre, and the 5 cylinder TTRS..
In The Box:
1 x FMDV14T Blow Off Adaptor
3 x M6 x 40 Socket Cap Bolts
1 x Forge Sticker
If you are unsure if this product is suitable for your application, please contact us.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
What a terrific upgrade. Installed on a MK5 VW GTI. The install took 10 minutes not including getting the car up in the air. The sound is an amazing upgrade over the stock diverter valve sound. Lots of great noises without the cost to install a full diverter valve. Absolutely recommended.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Oil Catch Tank System for 2.0 Litre FSi Vehicles Without Charcoal Filter
Manufacturer: Forge Motorsport