This alloy tube is fitted with an alloy boss to accept the MAP sensors, as found on Audi, VW, SEAT, and Skoda (VAG) vehicles. The housing will fit the larger and smaller sensors, by using the size reducer supplied.
It is available in a choice of 60mm or 63mm outside diameter and 110mm or 240mm tube length. These are selectable in the options above.
This tube is NOT a direct replacement for any particular vehicle, even though it may appear in a specific vehicle listing. It is for those who are constructing a custom installation.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.