Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock.
These CNC machined precision alloy wheel spacers are 11mm thick with a 57.1mm bore and dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcentric" spacers) The spacers are suitable for most vehicles produced by Volkswagen Group. A 11mm spacer will give an overall track increase of 22mm when fitted to both sides of an axle.
These spacers are priced and sold per pair.
Please note: Our 11mm, 16mm, and 20mm hubcentric wheel spacers will NOT work on the rear wheels of the MK3 VW 5x100 applications due to the longer length of the center hub. There is no problem with the smaller 3mm, 5mm, and 8mm NON-hubcentric spacers.
Extended wheel bolts are not supplied.
In The Box:
2 x FMWS10 11mm Wheel Spacer
1 x Forge Sticker
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport