Designed to fit as a replacement for the original Bentley factory valve which is prone to failure when the engine has been tuned or had an ECU upgrade to the engine software.
This simple but effective upgrade is machined from aircraft grade aluminium and comes ready to install with no fitting kit required.
The Forge valve upgrade will be supplied with our "green" coded spring which is suitable for standard or mildly tuned engines, we also supply in the kit an uprated yellow coded spring to allow for fine tuning of your diverter valve set up.
This valve is suitable for:
- Vauxhall/Opel Astra G or H type Z20LET Engine
- Astra VXR J Type
- Astra 1.6 GTC
- Corsa VXR 1.6 Turbo Z16LER Engine
- Vauxhall Zafira A or B with Z20LET Engine
- Bentley Continental GT 2003-11
In The Box:
1 x FMDVK04D Valve
1 x Uprated Yellow Spring
1 x Forge Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.