A Rear Big Brake kit with 4pot calipers and 356 x 28mm ventilated discs.
The discs are grooved to remove braking residuals and maintain optimum performance. Included in the kit are Forge braided brakes hoses, mountings, and EBC pads.
This kit unlike many kits on the market utilises the OEM handbrake function using our hydraulic handbrake mechanism. This kit is suitable for the VW T5/T6 Transporters as long as they are fitted with 18inch or larger wheels. Depending on your wheel design, you may need spacers between the hub and the wheel in order to clear the calipers. Our 4pot caliper is 12.42mm wider than the original caliper. We measure this from the disc face to the outside of the caliper. This should give you a easy and quick way of finding out if these will fit behind your wheels. These kits do not have CE / TUV approval and are recommended for race use only.
This brake kit is supplied with EBC Yellow Pads (Fast Road and Track Day).
PLEASE NOTE: As this is a new prodcut there will be a lead time of around 10-12 weeks
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.