The VW Touareg(T1/T2), Audi Q7 and Porsche Cayenne platform is what started it all for offroad capability SUVs. Whether you own one in Diesel Form or Petrol the desire to take it off the paved road to the great outdoors creates some challenges. One of which is more ground clearence. Our Development Teams have worked with the engineers at Powerflex to create a perfect solution to this problem. Utilizing their PU product together we have created a lift spacer that will handle anything you can throw at it.
Increased ground clearance
Lifts the vehicle 2.0".
Front and Rear struts must be disassembled.
Kit contains 4 spacers (2 Front and 2 Rear)
Install for spacers:
Spacers are installed under the base of the spring
VW Touareg 04-10
Porsche Cayenne 02-10
Audi Q7 05-15
To ensure fitment, verify your front top hat is 4 bolts and not 3
DOES NOT FIT AIR SUSPENSION EQUIPPED VEHICLES
Professional Installation is Highly Suggested. No installation instructions are included with the kit.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.