With the release of the VW MQB Alltrack/Tiguan line up from Volkswagen comes the desire to raise the vehicle for more ground clearance. Forge Motorsport has taken several vehicles through the testing process to determine the maximum lift while still giving the vehicle a factory ride. We worked closely with SMITH VW to make this possible Limited to the amount of room that the factory axle will move this kit provides a 1.25" total lift while leveling the front of the vehicle with the rear.
Easy bolt-on installation
Maintains factory ride quality
Increased ground clearance
Levels the front with the rear of the vehicle
No need to disassemble your struts to install
Kit will include 4 spacers (2 Fronts and 2 Rears) as well as mounting hardware for the front Strut-Spacer. Rear kit will reuse existing bushing insert.
Wheel/Tire Pictured on the Tiguan is a 17x8 with 235/65/17
Wheel/Tire Pictured on the Alltrack is a 16x8 with 215/65/16
*Hardware Color will Vary based on supplier
Professional Installation is Highly Suggested. No installation instructions are included with the kit.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.