This will fit OEM part number JB3G-6K775-AC
A superbly hand fabricated and British manufactured intercooler designed for Deranged trucks and suitable for the Ford Ranger T7 2018 Onwards with either the 2.0 single or twin turbo Ecoblue. With owners pushing high torque figures and running plenty of boost through engine software re-calibration, the OEM intercooler end tanks can suffer from fatigue very quickly. The last thing an owner needs is to have their truck out of action due to a severe boost leak from the plastic end tanks cracking then failing. With this in mind, Forge Motorsport have re designed the OEM cooler with a 37% larger core and 31% bigger surface area to ensure your engine and inlet air temps stay as cool as possible. This core combined with our strong end tanks is the perfect solution for any Ford Ranger T7 owner ensuring the intercooler will NOT fail running high boost and of course is backed by our lifetime warranty.
Available in our textured finish black powder coat for maximum longevity.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.