Description
Product Description
This intercooler is for the Mitsubishi EVO 10 is larger than the OEM intercooler and uses a highly efficient tube and fin core design. Our core uses up all the space that Mitsubishi had failed to take advantage of. The core measures a massive 540x355x100mm. The end tanks are designed such that the standard boost hoses can be retained. Installation requires NO cutting of the bumper at all. Total fitting time is only around 3 hours. We have seen excellent results on both the FQ300 and the FQ360. On the FQ300 we recorded gains of 13bhp and 18lb/ft of torque in back to back testing, with noticeable gains all the way from 3000 to 7000rpm. The manifold intake temperatures were reduced by 10 degrees centigrade with an overall drop in the resistance of the cooling system, meaning that the turbo now works less hard at the same power levels. On the FQ360 we recorded a significant increase in power of +12hp, with an increase in torque from 4500rpm, again pulling strongly to the redline.
Click here to find out about information and care for your
Forge Motorsport cooling product.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Warranty
Warranty Infomation
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
Please fill out your details below
We use Mailchimp as our marketing automation platform. By clicking submit to this form, you acknowledge that the information you provide will be transferred to MailChimp for processing in accordance with their Privacy Policy and Terms.