We took one of the very first UK Mini R56’s produced and immediately set to work to improve the OEM intercooler.
We did this with the first ever ground breaking innovative L Shape intercooler core design.
Many other companies simply copied this design, but Forge still remain the clear market leader due the exhaustive core testing undertaken in the development stages , We were not content to just use the first air core we could buy from China .
The Forge Motorsport development team tested 4 different constructions of air core before choosing the final stuffed fin stepped design intercooler for the 2007 onwards models (R56/R57) BMW Mini Cooper S Turbo.
As a reduction in intake air temperature increases the density of the charge mixture within the combustion cylinder, any temperature reductions will equate to more power. This intercooler is constructed using a combined 80/40mm high thermal efficiency core, with a 250% larger surface area and a 125% thicker base core, to achieve the best possible results.
In fact, even in relatively low road speeds/air velocities, our intercooler was able to better the OEM unit by 9°C, with greater improvements being achievable during greater speeds during track testing. The replacement intercooler is supplied with all the mountings to allow ease of installation.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Is part of a series of upgrades for my 2011 MCS to eventually go to Stage 2. I had a cheap chinese one for a bit but decided to spend the cash to get this, while the performance increase is negligible it did make the throttle response noticeably quicker
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.