Hosetechnik are proud to release a high-performance 4 piece brake line set for the Toyota Yaris GR 1.6. These are a direct replacement/upgrade for the OEM brake line set and require no further modifications to fit.
Each brake line is hand built in house at our workshops in Gloucester (UK) using only the best available 95PVC coated Stainless steel braided PTFE hoses and machined Stainless Steel end fittings resulting in a brake hose that will perform under the most extreme and harsh conditions, whilst still looking good and perform at the highest level.
- Our hoses eliminate all the problems associated with the original manufacturer’s rubber ones
- Immediate brake pedal response
- Lifetime Warranty
- Choice of colour
- Reduces pedal sponginess under hard braking
- Compatible with all brake fluids
- Will not corrode
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport