This intake was designed for RHD vehicles and will NOT fit the LHD version.
***This item is special order. Two week arrival from UK if in stock***
Forge Motorsport are excited to present our new Hi flow intake system for the Suzuki Swift Sport. Many months and man hours of development have gone into this product to achieve our three main objectives.
- Increase power and torque output
- Improve the sound characteristics of the engine note
- Improve the visual impact of the engine bay
During our testing, we found that the location of the original air box was susceptible to a vast amount of heat soak this is because the airbox air feed is placed directly above a very hot source of heat - the radiator. This led us to design and relocate where the air filter/airbox is housed in the engine bay. The Forge cold air intake system now cleverly draws air from within the Suzuki Swifts front bumper keeping the intake temperatures extra cool in any climate. After extensive testing, we found that our carbon fibre canister filters worked the best. The filter element itself is provided by Pipercross, and is fully serviceable or replaceable if necessary. The pipe work of the kit runs around the cold side of the engine and away from the engines turbo manifold, this again is to keep intake temperatures down as low as possible. In total, we observed intake temperatures fall from 39°C down to 26°C. These numbers will come down further still with the addition of our intercooler upgrade.
The Forge High Flow airbox produced an impressive increase of over 8BHP at 5500RPM and a gain of touqe throughout the entire rev range on independent dyno testing.
The design of this kit has also introduced some excitement to the driving experience with a subtle yet characterful induction roar when on harder acceleration.
You will be very happy with the visual impact with the kit upon opening the bonnet. Every part of the kit from the handmade aluminium hard pipe to the bespoke silicon hose and the carbon fibre filter both look and feel high quality - quite simply, because they are!
The kit comes complete with everything you need for installation, which can be carried out in around 40 minutes, including a set of full colour instructions.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.