Check out the "May Also Fit" tab if you would like to work with us to confirm fitment on other vehicles/models!
- Lifetime warranty*
- The filter is manufactured to Forge’s specifications by Pipercross
- Washable and reusable design.
- Layered multi-density foam technology.
- Designed and manufactured in Great Britain.
- Improvement in engine power and torque.
- Designed to flow stronger for longer.
- Fitting is straightforward and can be completed in 20-30 minutes.
- This kit requires no cutting or modification to the vehicle, allowing it to be reversed back to stock.
FMINDK39 is the long-awaited Forge induction kit for the VAG 1.0 TSI, including the Seat Ibiza Mk5. Our induction kit is an evolution of the FMINDK30 used for the VW UP! GTI. There are two key changes from that kit; the main and most important change is the incorporation of the OEM air duct which allows the kit to fit up to the original cold air ducting. The second alteration is the inclusion of a lid to the heat shield which has been selected to retain as much of the cold air flowing into the airbox as possible.
After time spent on the dyno, we achieved gains of 5 bhp and 6lbft torque throughout the rev range which is extremely pleasing results not to mention the improved sound track our intake gives this punchy little 1.0 litre engine - higher gains can be expected from mapped cars.
The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of three colours: black, red, or grey. The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any car engine bay both technically and aesthetically.
Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge intake.
Please note, if your engine looks like the picture below FMINDK39 and FMDV18 is not compatible.
If your engine looks like the picture below, FMINDK39 and FMDV18 is compatible.
As the engine does not have a diverter valve fitted as standard, Forge Motorsport have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle but it also increases the throttle response during gear changes by reducing turbo lag, it is designed to help the turbocharger maintain its rotational speed ready for when you accelerate, as well as prolonging the life of your turbo.
The OEM turbo inlet part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we removed the chamber allowing us to increase the volume and air flow significantly. Our hose design also has an internal stepped area where it is positioned and joined to the turbo housing, this is to ensure the transition is as smooth as possible from the inlet tract to the turbo.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
All Deliveries are sent via Fedex. We cannot guarantee delivery timelines as all orders are up to shipper schedules and routes. Delivery fee is a Flat Rate of $20 fo all orders over $20. Orders below that value are costed out based on weight. Signature required may be added to your package. Orders can not be re-directed, held, or re-scheduled.
Shipping outside of the Lower 48- Duty Charge Information
All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process.
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the firstname.lastname@example.org email address if you require any more information. We reserve the right to change the delivery service and company at any time.
***Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.
Blow Off Valve for Ford Focus RS MK3 & Vauxhall Adam, Astra, Corsa, and more
Manufacturer: Forge Motorsport
Induction Kit for Hyundai i30N, Kona N, Veloster N, and Elantra N
Manufacturer: Forge Motorsport