Upgraded tuning for your Passat B7 2012-2014 TDI this price includes the New Q Pro+ Module for easy flashing of your cars computer from your garage or driveway. New Q Pro+ will soon be able to flash the DSG as well!!
KermaTDI takes a systems analysis approach to tuning, rather than follow conventional wisdom or percentages, we look for possible gains in every aspect of the given hardware set and engineer your tune based on the respective capacities of each piece of hardware on your TDI.
In return you get a custom file that is specific to your vehicles performance and reliability.
Highlights on this tune:
+41whp and +72lb-ft
- EGT levels are in spec
- soot levels are clean
- regens like stock
- passive regens are correct
- mpg has been running over 50 on our test car
- throttle delay seems to be gone (no more turbo lag)
- will throw you into your seat
- very easy to drive but the power is there if you need it
- Tuning and support is all done in house
- We do not charge for an upgraded stage (upgrades are free as long as you get the parts from us)
- Dyno Proven (Stock Dyno Pull and Tuned Dyno for a correct reading of +WHP and +WTQ)
DSG FLASH IS RECOMMENDED
Fits 2012-2014 Passat TDI manual and dsg.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport