A Pair of Porsche 991/911 Recirculating Valves.
These valves are fully customisable to fit your application with two uprated springs provided in the kit. Forge Motorsport's improvement on the original valve has resulted in a compact and aesthetically pleasing design that is fully serviceable, unlike the OEM valve. Coupled with our unique piston design this is the fastest responding DV on the market allowing for an improved throttle response
These valves are competition tested and used on many high performance Porsche’s - All Forge Porsche parts are Engineered for Performance and Guaranteed for life.
Please select whether you want a black or matt silver valve, using the options above.
2 x FMDV008 Valve
2 x Uprated Yellow Spring
2 x Uprated Blue Spring
2 x Cable Tie
2 x 2.5mm Allen key
4 x 35mm Hose Clamps
2 x Instruction Booklet
2 x Forge Sticker
If you are unsure if this product is suitable for your application, please contact us.
The valve has a port size of 25mm
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.