Pipercross Performance Induction Kits replace the original restrictive paper air filter and airbox with a performance, high-flow cone style filter and necessary adaptors and pipework.
The foam filters have been designed to improve air flow and horsepower, offering a crisper throttle response and superior performance for improved acceleration and greater driving enjoyment. The spun aluminium base has a uniquely designed air inlet, incorporating a full radius air inlet bellmouth to allow air to pass smoothly into the engine, maximising power output.
Due to the deep foam construction of each Pipercross air filter, airflow is able to negotiate trapped dirt. Air filter service intervals are extended and by simply cleaning and re-oiling the Pipercross filter, there is less waste and service costs are reduced.
Crisp induction roar
Easy to clean and reuse
All Pipercross performance induction kits are pre-impregnated with lubricant, so therefore do not require you to purchase any.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport