This will not fit the B48 D series engine
Developed from our direct involvement with the Mini Challenge series, Forge is proud to release an oil cooler kit for the BMW Mini B48 engine found in the Mini Cooper S and JCW models (2013-2015). The kit features a CNC machined billet aluminium adapter plate that replaces the OEM coolant/oil heat exchanger. The adapter plate has an internal coolant channel to allow OEM coolant circuit to be maintained.
The BMW B48 engine fitted to the Mini F56 is not fitted with an external oil cooler as standard, but for fast road or track use this kit is a must. The bespoke laser cut aluminium bracket allows the 13 Row Setrab oil cooler to be mounted directly behind the top section of the front grill, ensuring that the oil cooler is placed in the optimum cooling position.
Supplied with the kit are 2x pre-assembled high-quality double braided AN-10 oil lines.
Ideal if you are preparing a track or racecar.
This kit does not require any cutting of the vehicle.
The kit comes with the following:
1x Billet Aluminium adapter plate
1x Plug bolt
1x Copper washer
4x Adapters M22 to AN-10
4x Bonded washers
1x Oil cooler bracket
2x Oil lines
1x 13 Row oilcooler
5x Cable ties
2x Self tapping screws
All the fixings required
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Oil Cooler Kit for Mini F56
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Blow Off Valve for Ford Focus RS MK3 & Vauxhall Adam, Astra, Corsa, and more
Manufacturer: Forge Motorsport