A complete Oil Catch tank solution for the Citroen DS3 and Peugeot 207 (1.6 turbo engines)
Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Turbo charged engines often draw significant amounts of oil into the engine through the PCV system. This oil catch tank system removes aerated oil so that it can be drained and recycled.
If you have ever wondered just how efficient these kits are at removing the sludge and oil, take a look at the video above.
Aerated vapours in the blow-by gases are only partially responsible for intake valve deposits. Installation of this product will only partially limit the potential for these deposits to occur. Intake valve deposits can still form to some degree due to seepage of oil from the intake valve guides.
Please note, this will fit with the OE Air Box system.
These kits are available with either Red, blue, or black silicone hoses. Please select the colour required in the options, when placing your order.
PLEASE NOTE: THIS PRODUCT WILL NOT FIT THE DS3 RACING
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.