Free Shipping to Lower 48!
Features: 88 Square Feet of Freestanding Covered Shelter, 600D Poly Cotton Rip-Stop Cover, Boxed Aluminum Rafters, Pivoting Aluminum Adjustable Poles, Tie Down Points for Securing Poles and Water Run Off, 1000G PVC Travel Cover With #10 Zipper, Ballistic Nylon Tie Downs With S Connects and Buckle, Shock Cord With Retention, Zippers To Secure Enclosed Shelter, Heavy Duty Oversized Stakes
What’s included: 180 Degree Awning With 4 Built-In Aluminum Rafters , 3 Pivoting & Telescoping Aluminum Poles + 2 Telescoping Aluminum Poles, 4 Sets of Shock Cord, 4 Heavy Duty Stakes, Travel Cover, 3 Heavy Duty Mounting Brackets and Hardware, Nylon Reinforced Tie Down Kit
Opened: 240" x 78.5" Closed: 88” x 7” x 6”
Fitment: Anything with a factory or aftermarket roof rack. Please confirm rack weight capacity prior if you’re unsure.
Installation: Will accommodate most factory and aftermarket racks.
Warranty: Four Year Limited Warranty
When you’re looking for a quick deploying one-man operation awning that gives you 88 square feet of shelter you came to the right place. Unlike other awnings, our Nomadic 180 requires no poles to set it up because of the pair of reinforced oversize hinges and heavy-duty rafters. Our covers are manufactured out of 280G poly cotton rip stop material that has heat sealed seams which ensure you’re not going to see any leaks through seams regardless of the size of rain you’re dealing with. If you see the weather changing or something stronger than a breeze turns up, you can deploy the three pivoting aluminum poles and adjust to your desired height with a quick lock system in seconds. When its time to lock down base camp for serious weather, deploy the poles, secure the stakes with the supplied para-cord and put up the optional enclosure shelter and your ready to take on some the most severe storms. When its time to stow your Nomadic 270 away it takes minutes to break down and secures nicely in 1000g PVC cover.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport