This front mounting intercooler has been designed as an upgrade for the Nissan GTR R35 models. After considerable trials, we found that the most efficient for these models was a core of tube and fin design, and along with an overall increase in dimensions we have been able to improve the cooling ability dramatically. We make full use of the front opening of the bumper, and fully duct our intercooler to it, unlike many others on the market. This gives a huge leap in efficency and goes a long way to keeping intake temperatures down. Our intercooler is a massive 102% larger than the stock intercoolers (i.e. more than twice as big!). Our own testing was conducted on software and hardware tuned vehicles, to ensure that they would be working their hardest and the results showed both a reduction in inlet temperature, an increase in horsepower and torque, but with no detrimental effect on turbo spool-up. Very recent customer tests (October 2012) showed only a 9 degrees centigrade increase in inlet temperatures on an 870bhp GTR during a full power run on the dyno. This GTR intercooler kit is very comprehensive, supplied complete with all parts required, including mandrel bent 70mm pipework ( black only) to both throttle bodies, silicon hoses, all clips, bolts, and nuts together with comprehensive colour instructions. No cutting of the crash bar or any part of the bumper is necessary at all. Please note that a Nissan throttle body optimisation is recommended PRIOR to installation, and that POST installation the car should be mapped with either the Cobb Accessport or EcuTek software which are pre-programmed with a setting for the Forge intercooler. Contact your Cobb or EcuTek vendor for more information. When ordering please select from the options below your vehicle model year and if Headlight washers are fitted . Please note: The 70mm alloy pipework is only available in crackle black finish.
To purchase this product, or for further information, please contact:
Telephone: +44(0)1684 850999
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.