At Autosport 2005, we were proud to release our uprated Intercooler for the BMW Mini Cooper S. After a comprehensive development program involving thorough testing in various environments, we are convinced that you will not find a superior Intercooler for this application.
Our development program included the use of many types of Intercooler core and end tank designs. At the initial stages we ran two development projects alongside each other, one an air to air Intercooler and the other an air to water Chargecooler system. The air to air development achieved significantly improved temperature reductions in comparison, which convinced us to solely concentrate on this option. At each stage of development, testing was conducted using a vehicle in various states of tune. (With and without, performance software, supercharger reduction pulleys, bonnet scoops and performance air intake systems).
With this Intercooler offering up to a 29% reduction over the original equipment, it is a must for those wishing to increase engine power.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.