With the known deficiency of the RS250 Radiator in hot climate conditions, we were asked to develop a front mounting intercooler with a minimum air flow restriction to the OEM radiator, but also one that shows a significant improvement in the cooling compared with the original intercooler.
Through the use of a high efficiency intercooler core and changing the airflow characteristics with frontal ducting, we have created the perfect solution. Test results show not only a gain of 12 bhp, but also show the + 10 ft/lbs of torque that has been gained across the rev range. This is really felt when driving the car, along with the fact that the power is available for longer as the revs increase. Of course if you are experiencing extreme temperatures or are after the ultimate solution to hot climate running, we recommend using our uprated radiator FMRADRS250 in combination with this intercooler.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.