- +30Hp and 50Nm of torque at 4500rpm
- 89% more volume
- Thin wall cast endtanks for superior flow.
- Fits the vehicle without any cutting or further modifications
- Features machined recesses in the intercooler mating flanges to accept the OEM sealing O-rings
- Supplied with all fittings required to fit the intercooler
We are pleased to release the Forge Motorsport intercooler for the Honda Civic Type R FK8.
Utilising our industry leading bar and plate design, alongside Solidworks CAD and flow simulation design (Computational Fluid Dynamics CFD) to develop our high flow cast end tanks. The turbo side endtanks features an internal divider to ensure the full volume of the core is utilised.
The bar and plate core has over 89% more volume and larger frontal area. To ensure the optimum airflow from the front of the vehicle onto the surface of the core this intercooler utilizes the OEM plastic ducting.
When fitted to a remapped vehicle, just the intercooler alone gave an increase in mid-range power of approximately 30Hp and 50Nm of torque at 4500rpm. With this power increase, the feel and drive of the FK8 is completely transformed due to the massive increase in power throughout most of the rev range.
Inlet air temperatures have been halved with this superbly engineered intercoolers. This results in the forge intercooler being one of the first and best modifcaitons any enthusiast would make to gain safer running on their tuned vehicle.
The intercooler is available in red or black with a tough durable and corrosion resistant powder coating to ensure the maximum heat dissipation and product longevity even in the worst environments.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport