This induction kit is for the 3.2 Audi A3. The filter is a non-oiled cotton gauze high flow cone filter housed in a carbon fiber composite enclosed canister that connects directly to the an intake pickup at the front of the vehicle with an application specific inlet scoop. Everything is connected via high quality silicone couplers. The system creates a true ram air effect, and will only see airflow from outside the vehicle with absolutely no hot air from within the engine that could reduce power. We have dyno tested this kit, and have seen gains as high as 10 peak wheel horsepower improvement over the stock airbox and filter on Stage 2 tuned vehicles. Whilst Power gains may vary depending on your modifications and level of tune, this kit will offer a significant improvement over the original air box.
Please watch our video on how to fit an air filter without damaging it.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.