Following a running change to the 2015 Ford Focus ST250, we have re-engineered this performance induction kit to suit. Quality CNC Mandrel bent alloy inlet pipe work with no joins, quality 4 ply silicone hoses, and a high performance PiperCross filter increase filtration and flow.
As always we supply everything required for an easy installation.
This kit is compatible with 2015 onwards cars fitted with the twist type induction sensor located on the intake pipework next to the airbox as shown below:
*Please note - the Pipercross filter is excluded from the Forge lifetime warranty*
If you do have the pre 2015 model, please see FMINDST250
Please note: The engine cover cannot be fitted back to stock after installation of this kit
Please watch our video on how to fit an air filter without damaging it.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Uprated Intercooler Kit for the Ford Focus ST250 (DISCONTINUED)
Manufacturer: Forge Motorsport