This induction kit is designed for the 1.4 Turbo 122/125hp engines (not Twin Charged) engines as found in the SEAT Leon, Golf Mk5, and Audi A3. Utilising a high-quality carbon fibre cannister assembly and housing the Forge Motorsport designed Cotton filter, the components are protected from the engine bays high temperatures, the filter has a direct air feed utilising high quality ducting.
During comprehensive testing we found an increase of 5 BHP when the intake was installed and with a stage 1 tuned car over the factory airbox. This intake will give an all-round improvement to the airflow entering the engine, also helping to reduce turbo lag and give the owner that race sounding induction noise
The custom designed silicon hose is available in Red, Blue or Black.
- The Forge silicone hose in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
- This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
- The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
- Lifetime warranty
Please watch our video on how to fit an air filter without damaging it.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Blow Off Valve for Ford Focus RS MK3 & Vauxhall Adam, Astra, Corsa, and more
Manufacturer: Forge Motorsport