Brand: Forge Motorsport

Induction Kit for Hyundai i30N and Veloster N

Product code: FMINDK28
$399.00
Sorry Item Is currently not in stock!

Description

Product Description

Forge Motorsport are excited to release our industry leading intake for the Hyundai i30N. This aftermarket cold air intake system improves your i30N’s airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine

The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The upshot to all of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai’s 2.0 four pot engine.

As always filtration is important when developing an intake, so we once again turned to the industry leaders and Forge long term filtration partners Pipercross.

With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided flows 60% more air than the stock filter.

The intake is finished off with our unique black thermal powder coating. This kit comes with Forge’s usual detailed fitting guide to help make installation as easy as possible.

Hyundai boast figures of 275bhp and 278lb.ft on their standard vehicle. When we ran our CAT backed performance exhaust development vehicle on the dyno with this intake it reached figures of 296bhp and 310lb.ft!

Interestingly there has been lots of divided opinions about our intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken,. During this testing, we did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C.

Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The Gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge Motorsport product.

In the Box:
1 x Black Alloy Hard Pipe
1 x Pipercross Filter
1 x Valve Silicon Joiner
2 x Hose clamps

Please watch our video on how to fit an air filter without damaging it.

 

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Product Reviews

Product Reviews

from on Aug 12th 2019
Works great! Was very easy to install took a little less than an hour. Looks great and sounds great, very solid design. I did some testing with it vs the stock box and the IAT difference is very minimal. In fact at some points the Forge intake was lower. Biggest difference is that heatsoak sets in quicker with the Forge intake but heatsoak dissipates quicker as well so it's a good trade off. Over all I'm very happy with it.

Both graphs had similar ambient temps about 95f 70-80% humidity.

Stock airbox: https://datazap.me/u/jigbits/log-1565486484?log=0&data=1-4-6

Forge intake: https://datazap.me/u/jigbits/log-1565314076?log=0&data=1-4-6

from on Aug 11th 2019
Works great! Was very easy to install took a little less than an hour. Looks great and sounds great, very solid design. I did some testing with it vs the stock box and the IAT difference is very minimal. In fact at some points the Forge intake was lower. Biggest difference is that heatsoak sets in quicker with the Forge intake but heatsoak dissipates quicker as well so it's a good trade off. Over all I'm very happy with it.

Both graphs had similar ambient temps about 95f 70-80% humidity.

Stock airbox: https://datazap.me/u/jigbits/log-1565486484?log=0&data=1-4-6

Forge intake: https://datazap.me/u/jigbits/log-1565314076?log=0&data=1-4-6

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Tags

Hyundai

Instructions

Warranty

Warranty Infomation

All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

Shipping

Shipping

Please fill out your details below 

We use Mailchimp as our marketing automation platform. By clicking submit to this form, you acknowledge that the information you provide will be transferred to MailChimp for processing in accordance with their Privacy Policy and Terms.

* indicates required

Terms and Conditions

Forge Motorsport will use the information you provide on this form to be in touch with you and to provide updates and marketing. You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at sales@forgemotorsport.com. We will treat your information with respect. For more information about our privacy practices please visit our website. By clicking subscribe, you agree that we may process your information in accordance with these terms.