Suitable for the BMW 335 fitted with the N54 Twin Turbo engine. This alloy hard pipe fits to the throttle body and incorporates our high flow blow off valve. This valve, fresh from our R&D department, is the largest displacement valve that Forge have ever made! Featuring a 50mm (2”) aluminium piston so that there are no issues with split diaphragms, we have not found the power handling limits of this valve yet!
In The Box:
1 x FMBM335DV1 Valve
1 x Alloy Throttle Body Hard Pipe
1 x Silicone Reducer
2 x Silicone Straight Blanks (25mm)
2 x 30mm Hose Clamps
1 x 80mm Hose Clamp
1 x 90mm Hose Clamp
2x M6 x 12 Socket Cap Bolts
1 x M6 x 16 Socket Cap Bolts
1 x M6 Penny Washer
2 x M6 Plain Washer
1 x USB Instructions
1 x Forge Keyring, Bottle Opener and Sticker
Note: that due to the high flow and low restriction offered by the 50mm valve, they are very quiet in operation.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
awesome product. great sound from their new blow off valve. my only complaint is the the silicone pipe is difficult to get on in the right position. it has blown off the intercooler pipe 3 times since install. however the quality of the pipe and kit itself is top notch. install instructions come on a thumb drive. which is nice. but not effective considering i dont have a computer near where i work on my car. i prefer paper instructions. all in all it is a great pipe and very pleased. i just have to find a way to get this hose clamp to stop popping off.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Recirculation Valves For The BMW N54 Twin Turbo Motor 135 335 Models
Manufacturer: Forge Motorsport