This front mounting intercooler kit is suitable for the Mk VII VW Polo 1.8T with a 9N2 chassis, late 2006-onwards. The kit can be installed on vehicles equipped with or without headlight washers. Everything needed is supplied including comprehensive instructions.
The difference, once installed is just amazing, but then thats not surprising with a reduction in temperature of up to 30°C over the OEM intercooler. This is a very tidy installation with the pipe runs kept to an absolute minimum, so no additional lag is experienced. We can supply hoses in red, blue, or black. Just make your selection from the options above when ordering.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.