This Intercooler kit has been produced for the 2005 onwards Vauxhall Astra VXR (H chassis). The kit includes everything required. The pipework is 60mm diameter, with polished alloy hard pipes and re-inforced silicone hoses. Along with all the brackets and fixings, there is a simple to follow set of instructions.
The kit also comes with a high flow tophat pipe and high flow map sensor tube. Our kit is a full boost run kit, from turbo to inlet manifold. During our development, testing the intake temperatures on the intercooler didn't exceed 30°C, even under load at full throttle whilst running at high rpm.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.