Forge Motorsport direct replacement recirculation valve for the Honda Civic Type R 2015. This hand polished valve bolts directly to the turbo in place of the OEM diaphragm type valve. Built in the UK, it features a robust piston design that allows for tuning with interchangeable springs. For those running higher boost pressures after software tuning, this really is a must to ensure that you do not lose boost through the valve.
In The Box:
1 x FMDV5R Valve
1 x Uprated Yellow Spring
3 x M6 x 16 Hex Head Bolts
1 x Forge Sticker
This product comes assembled with a green spring but is supplied with an additional uprated yellow spring. If you wish to further tune this product to fit the needs of your engine, please see the spring tuning kit below.
If you are unsure if this product is suitable for your application, please contact us.
Did You Know?
This Forge Motorsport valve relies on an internal spring in order to maintain a seal so that you have boost pressure when it is needed. If the spring is too, weak you lose power. Previously, when an engine was "chipped" or the boost pressure increased, the tuner would need to fit a stronger spring, carefully matched to the increased boost. For those running switchable software programs, there was no perfect solution.
Forge are pleased to offer a fit once and forget solution, the FMIPCV. No more changing springs, turning adjusters, or fine tuning, whilst not knowing if you have done it correctly. This works straight out the box. It will work perfectly on a standard engine, a highly tuned engine, and anywhere in between, without the need to change anything! It does it all by itself, ensuring that you always get the maximum power and perfect drivability.
If purchased in combination with this valve, we can now offer you the FMIPCV at just £42 instead of the normal selling price of £103.95 (tax and regional differences may apply). Simply select the 'Valve + FMIPCV' option to save 60%, and know that your valve will always perfectly match your engine and give optimum performance.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.