Fiesta Mk7/7.5 1.0 Ecoboost intake
The 1.0 Ecoboost engine runs a small turbocharger so the key to releasing power from the engine is minimising restriction, which is exactly what the Forge motorsport intake does.
Featuring a fully CNC machined MAF housing and pipe that matches the standard Ecoboost housing exactly, coupled to a large air filter (available in either foam or cotton), the Forge Motorsport Ecoboost intake looks as good as it sounds, with a noticeable increase in induction and dump valve recirculation noise.
The kit comes complete with all parts necessary to fit, including a large heatshield in order to reduce inlet temperatures. Full instructions are included.
We recommend that you allow yourself 1-2 hours to complete the full installation of this Forge product, make sure to familiarise yourself with the instructions before undertaking the job also.
*Please note - the filter is excluded from the Forge lifetime warranty*
FOR REPLACEMENT FILTER PLEASE SEE HERE
Please watch our video on how to fit an air filter without damaging it.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport